8 Year Exporter Delta Plc - CT-5321: Modbus Serial Port Module – ODOT
8 Year Exporter Delta Plc - CT-5321: Modbus Serial Port Module – ODOT Detail:
Product Details
Technical Parameters
General parameters
| Power | Max.500mA@5.0Vdc |
| Isolation | I/O to internal bus: opto-couple isolation (3KVrms) |
| Field Power | Nominal:24Vdc, Range:22-28Vdc |
| Wiring | I/O Wiring： Max.1.5mm²(AWG 16) |
| Mounting Type | 35mmDIN-Rail |
| Size | 115*14*75mm |
| Weight | 65g |
Environment Specification
| Operational Temperature |
-40~85℃ |
| Operational Humidity |
5%~95% RH(No Condensation) |
| Protection Class | IP20 |
Serial Port Parameters
Note: M represents the valid parameters of master mode, S represents the valid parameters of slave mode, and F represents the valid parameters of free transparent transmission mode
| M/S/F:Channel Number |
1Channel |
| M/S/F:Interface | RS485/RS232/RS422 |
| M/S:Protocol | Modbus RTU/ASCII |
| M/S/F:Working Mode |
Modbus Master, Slave, Transparent Transmission |
| M/S/F:Baud Rate | 300bps-500Kbps |
| M/S/F:Data Bit | Bit 7, Bit 8 |
| M/S/F:Parity Checking |
None, Odd, Even |
| M/S/F:Stop Bit | Bit1, Bit2 |
| M/S/F: Character Interval |
1.5t-200t |
| F: Byte Order Conversion |
Prohibit, Enable |
| M/F:Response Timeout |
Customized， default： 1000 |
| M/F: Polling Timeout |
Customized， default： 100 |
| M: Read Data Processing Mode |
Hold the last input value, clear the input value |
| M: Data Output Mode |
Polling, event triggering (data changes) |
| M: Module Control Enable |
Prohibit, Enable |
| M: Module Control Mode |
Level trigger (continuously valid), rising edge trigger (single valid) |
| M: Power on Event Output |
Prohibit, Enable |
| S:Slave ID | Customized， default： 1 |
| S:Response Time |
Customized， default： 50 |
Product detail pictures:
Related Product Guide:
Our crew through skilled training. Skilled skilled knowledge, strong sense of company, to meet the company wants of customers for 8 Year Exporter Delta Plc - CT-5321: Modbus Serial Port Module – ODOT , The product will supply to all over the world, such as: Naples, Saudi Arabia, Belgium, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Elaine from Colombia - 2017.08.15 12:36
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By Gloria from Namibia - 2018.10.01 14:14
Write your message here and send it to us
