Automotive Industry
- IO Modules
- Protocol Converter
- PLC
- Industrial Switch
0102030405
BN-8032-L Profinet COMM Board Supports no MRP no IRT IO Card
Technical Parameters
The BN-8021 CANopen COMM board Parameter
| COMM Board Hardware Parameter | |
| System Power | Nominal:24Vdc,Range:19.2~28.8Vdc Protection:Reverse Protection |
| Power Consumption | 50mA@24Vdc |
| Intemal Bus Supply Current | Max:2.5A@5VDC |
| Isolation | System Power to Field Power Isolation |
| Power Supply | Nominal:24Vdc,Range:19.2~28.8Vdc |
| Field Power Current | Max.DC 8A |
| IO Modules Supported | B32:2pcs,B64:4pcs |
| Wiring | Max.1.5mm²(AWG 16) |
| Environment Specification | |
| Operation Temperature | -30~75℃ |
| Operation Humidity | 5%-95%(No Condensation) |
| Ingress Protection Rating | IP20 |
| CANopen Parameter | |
| Protocol | CANopen DS401 |
| Connect the interface | 10PIN terminal |
| Station Address | Dial code setting(1-127) |
| Process Data | Input Max.328 Byte Output Max.328 Byte |
| Configuration Interface | Type-C |
| Transmission Rate | 10 kbit/s, 20 kbit/s, 50 kbit/s, 100 kbit/s, 125 kbit/s, 250 kbit/s, 500 kbit/s, 800 kbit/s, 1000 kbit/s |
