CN-8022 DeviceNet Network Adapter Remote IO System

General Parameters

System Power

Power supply: 19.2 V DC ~28.8 V DC (Nominal: 24VDC)
Protection: Anti-reverse connection protection

Module Consumption

60mA@24VDC

Internal Bus Supply Current

Max: 2.5A@5VDC

Isolation

System power to field power: isolation
The isolation voltage between system power and filed power is AC
500V
The isolation voltage between filed power and PE is AC 500V
The isolation voltage between system power and PE is AC 500V

Filed Power

Power supply: 19.2 V DC ~28.8 V DC (Nominal: 24VDC)
Protection: Anti-reverse connection protection

Filed Power Current

Max DC 8A

I/O Modules Supported

32

Wiring Diameter

Max.1.0mm²(AWG 18)
Min.0.2mm2  (AWG 24)

Installation

35mm DIN-Rail

Size

115 mm *51.5 mm *75 mm

Weight

130g

Environmental Parameters

Operating Temperature of
Vertical Installation

-35℃~70℃

Operating Temperature of
Horizontal Installation

-35℃~60℃

Relative Humidity

5~95%RH (No Condensation)

Storage Temperature

-40℃~85℃

Storage Humidity

5~95%RH (No Condensation)

Manufacturing Test
Temperature

-40℃~75℃

Ingress Protection Rating

IP20

Vibration Resistance

Comply with IEC 61131-2 and IEC 60068-2-6

Impact Resistance

Comply with IEC 61131-2 and IEC 60068-2-27

EMC Performance

Comply with IEC 61131-2 and IEC 61000-4

DeviceNet parameter

Station Type

Remote equipment station

Node Address (Station
Number)

DIP Settings (1-64)
When the dial value is not 1-64, the station number is forced to be 1

I/O Data Capacity

Input Max: 254 Bytes
Output Max: 254 Bytes

Transmission Rate

DIP settings (125 kbit/s, 250 kbit/s, 500 kbit/s)

Connection Interface

5 Pin terminal

Maximum Transmission
Distance

125 kbit/s --500m;
250 kbit/s --250m;
500 kbit/s --100m;