Leave Your Message
Products Categories
Featured Products

CT-122F: 16 channels digital input/0VDC/Source type

CT-122F 16 channels digital input/0VDC/Source type/Input 0V, the input low level is valid

Module features

◆ the Module supports 16 channels digital input, supports source input, the input voltage is 0V and the input low level is valid.

◆ the module could collect the digital output signal of field equipment (dry contact or active output).

◆ the module can be connected to a 2-wire or 3-wire digital sensor.

◆ the internal bus of the module and field input are isolated by optocoupler.

◆ the module supports input signal holding function, holding time can be set.

    Product Details
    • 1. Module Type
      2. State indicator
      3. N/A
      4. Wiring Terminal and identification
      5. Internal Bus
      6. Field Power
      7. Buckle
      8. Grounding Resilient Sheet
      9. Fixed Wiring Harness
    • CT-122F-16-channels-digital-inpute7t

    Product Characteristic
    CT-122F 16 channels digital input/0VDC/Source type/Input 0V, the input low level is valid
    Module features
    ◆ the Module supports 16 channels digital input, supports source input, the input voltage is 0V and the input low level is valid.
    ◆ the module could collect the digital output signal of field equipment (dry contact or active output).
    ◆ the module can be connected to a 2-wire or 3-wire digital sensor.
    ◆ the internal bus of the module and field input are isolated by optocoupler.
    ◆ the module supports input signal holding function, holding time can be set.
    ◆ the module carries with 16 digital input channel LED indicator.
    ◆ after adding counting submodule, the counting function is effective.
    ◆ each input channel of the module supports 32-bit counter with counting frequency <200Hz.
    ◆ the module could set the digital signal input filter time and counter byte transmission sequence.
    ◆ each channel of the module could set the counting mode and counting direction independently.
    Application
    Input parameters
    Channel Number 16 channels source input
    LED Indicator 16 channels input LED indicator
    Turn-on voltage Min.10Vdc to Max.28Vdc
    Turn-off Voltage Max.5Vdc
    Turn-on current Max.5mA/channel@28V
    input impedance >7.5kΩ
    Input delay OFF to ON :Max.3ms ON to OFF :Max.2ms
    filter time Default 10ms
    Sample frequency 500Hz
    Counter frequency <200HZ
    General parameters
    Power Consumption Max.60mA@5.0Vdc
    Isolation I/O to internal bus: opto-couple isolation (3KVrms)
    Field Power Nominal:24Vdc, Range:22-28Vdc
    Wiring I/O Wiring: Max.1.5mm²(AWG 16)
    Mounting Type 35mm DIN-Rail
    Size 115*14*75mm
    Weight 65g
    Environment Specification
    Operational Temperature -40~85℃
    Operational Humidity 5%-95% (No Condensation)
    Protection Class IP20

    Leave Your Message


  • Previous:
  • Next: