- IO Modules
- Protocol Converter
- PLC
- Industrial Switch
CT-3713 RTD Temperature Acquisition Module 3CH PT100
Product Details
-
1. Module Type2. State indicator3. N/A4. Wiring Terminal and identification5. Internal Bus6. Field Power7. Buckle8. Grounding Resilient Sheet9. Fixed Wiring Harness

Technical Parameters
General Parameters | |
Power |
Max.37mA@5.0Vdc |
Isolation |
I/O to internal bus: magnetic isolation (2.5KVrms) |
Field Power |
Not used |
Wiring |
Max: AWG 18 |
Mounting Type |
35mmDIN-Rail |
Size |
115*14*75mm |
Weight |
65g |
Environment Specification | |
Operating Temperature of Vertical Installation |
-35℃~70℃ |
Operating Temperature of Horizontal Installation |
-35℃~60℃ |
Relative Humidity |
5~ 95%RH (No Condensation) |
Storage Temperature |
-40℃~85℃ |
Storage Humidity |
5~ 95%RH (No Condensation) |
Manufacturing Test Temperature |
-40℃~75℃ |
Ingress Protection Rating |
IP20 |
Input Parameter | |
Channel Number |
3 Channels |
LED Indicator |
3 Green LED |
Resolution |
15 bits |
Sensor Type |
PT100 |
Measurement Range |
-200~850℃ |
Measurement Accuracy |
0.5℃ |
Conversion Rate |
400ms/3 channels |
Diagnostic Function |
32766:The sensor is not connected or the cable is disconnected -32766:short-circuit condition 32765:Chip failure 32767:Temperature overflow -32768:Temperature underflow |
Leave Your Message
- Warehouse Automation
- Analog output RTD/PT100
- Analog To Ethernet Converter
- automation Communication I/O
- Ethernet Ethernet Ip/Modbus
- Profibus Gateway
- Renewable Energy Equipment Manufacturing
- Replace Siemens Io
- Replace Wago Io Module
- Replace Wago Remote Io
- Rj45 Modbus
- Single Channel Temperature To Modbus

Automotive Industry





