Automotive Industry
- IO Modules
- Protocol Converter
- PLC
- Industrial Switch
DN-8032-L PROFINET Network Adapter Remote IO System
-
Min. Cycle Time0.6 ms
-
Expansion32 Modules
-
Wirring Diameter3.Min.0.2mm²(AWG24) Max.1.5mm²(AWG16)
-
ServiceODM&OEM
PRODUCT DESCRIPTION
Key Technical Features
-
Removeable terminals _ Easier Installation
(1) Staggered spring-loaded guided terminals
(2) Removeable terminals for easy module maintenance and replacement -
Redundant Backplane _ Enhanced Reliability
(1) Backplane bus supports redundancy
(2) Supports up to 32 I/O modules
(3) Full load refresh cycle of 0.6 ms -
Superior EMC Performance
EMC performance far exceeds IEC 61000-4 standard
Technical Specifications
|
General Parameter |
|
|
Current Consumption |
107mA@24VDC |
|
System Power |
19.2~28.8VDC (Nominal: 24VDC) Anti-inversion protection: support |
|
Internal Bus Supply Current |
Max.2A@5VDC |
|
Field Power |
19.2~28.8VDC (Nominal: 24VDC) |
|
Field Power Current |
Max. DC 8A |
|
Wirring Diameter |
Min.0.2mm²(AWG24) Max.1.5mm²(AWG16) |
|
Terminal Pluggable |
Support |
|
The Maximum Number of Expansion Modules |
32 |
|
Diagnosis Function |
Communication diagnostics, extended module status diagnostics |
|
Backplane Bus |
Double bus redundancy |
|
Installation |
35mm DIN-Rail |
|
Dimension |
119*83*80mm |
|
Product Certification |
CE Certification |
|
Communication Parameters |
|
|
Protocol |
PROFINET IO Device |
|
Input |
1440 bytes |
|
Output |
1440 bytes |
|
Transmission Speed |
10/100 Mbps |
|
RT |
Support, RT real-time communication minimum period is 1ms |
|
IRT |
Not support |
|
MRP |
Not support |
|
MRPD |
Not support |
|
Device Name Setting |
DIP switch or software configuration |
|
Environment Parameters |
|
|
Horizontal Installation Operating Temperature |
-35℃~60℃ |
|
Vertical Installation Operating Temperature |
-35℃~50℃ |
|
Storage Temperature |
-40℃~85℃ |
|
Environment Humidity |
5%~95%RH (No condensation) |
|
Installation Altitude |
<2000m |
|
Pollution Degree |
Ⅱ |
|
Protection Grade |
IP20 |
|
Mechanical Properties |
Comply with IEC60068-2-6, IEC6008-2-27 |
|
Insulation Withstand |
Comply with IEC61131-2 |
|
EMC Performance |
Comply with IEC61131-2, IEC61000-4 （ESD: Contact discharge±6kV, Air discharge±8kV, Performance level A; SURGE: Common mode ±2kV, Differential mode±1kV, Performance level A; EFT: ±2kV, Performance level A) |
A:The OLED screen allows engineers to view critical parameters—such as the IP address, subnet mask, and module operating status—directly on the device without needing to connect a laptop or install software. This significantly speeds up on-site maintenance and troubleshooting.
A:Yes. The DN-8032-L utilizes pluggable spring terminals. This allows you to unplug the terminal block with the wires still attached, making module replacement or maintenance quick and easy without re-wiring.
Ideal for industries requiring high-speed, cost-effective distributed I/O:
