ODOT IOs applied in 500 TPD paper plant DCS

In the paper mill it is driven by Schneider DCS.

DCS(distributed control system) is a process control oriented sytem for plant with many control loops, which means there will be a lot of data accquirement for each control loop, this requires a lot of I/O system.

In the paper industry DCS, the control desk requires high quality IO system.
ODOT I/O system provide stable solution for end uers of WTP between -40 ~ 85℃， with a 3 years of warranty.
And the couplers could support different brands of PLCs with the protocol of Profinet, Profibus-DP, Modbus-TCP, EtherCAT, EtherNet/IP, etc.

ODOT remote I/O system are applied for all control desk in 8 out of 14 remote io stations.

PLC: Schneider M580 level 4 CPU
Coupler:
ODOT CN-8031the Modbus-TCP Network Adapter

32 digital input module: CT-124H the 32 channels digital input, sink or source, 34Pin male connector, 24Vdc,

32 digital output module: CT-222H the 32 channels digital output, source, 24Vdc/0.5A，34Pin male connector