Automotive Industry
- IO Modules
- Protocol Converter
- PLC
- Industrial Switch
ODOT IP-IA-16DINDON 16-Channel Configurable Digital Input Output Module NPN IP67 IO-Link Slave Module
-
Min. Cycle TimeIP67 Protection Level
-
ExpansionIO-Link Slave
-
OPERATING TEMP16ch DI & DO
-
REDUNDANCYNPN
PRODUCT DESCRIPTION
The IP-IA-16DINDON integrates digital input and output functions into a compact IO-Link slave module. All 16 channels support configurable digital input or output operation, allowing the module to adapt to a wide range of industrial control and signal acquisition applications.
To ensure reliable operation in demanding industrial environments, the module supports configurable filtering and input holding functions, helping reduce electrical interference and maintain stable signal status. The built-in IO-Link Data Storage function enables automatic parameter backup and restoration during module replacement, reducing maintenance effort and minimizing downtime.
Compact, reliable, and easy to integrate, the IP-IA-16DINDON is ideal for factory automation, intelligent manufacturing equipment, and distributed industrial control systems.
Benefits for Industrial Automation
-
Flexible I/O Configuration
Configurable digital input/output channels provide greater flexibility for industrial control systems while reducing hardware inventory requirements.
-
Improve Signal Reliability
Input holding and configurable filtering functions help minimize electrical interference and improve operational stability.
-
Simplify Maintenance Operations
IO-Link Data Storage automatically restores device parameters during replacement, reducing maintenance time and commissioning effort.
-
Optimize Distributed Integration
Compact IO-Link slave architecture enables efficient integration into distributed industrial automation systems.
Technical Parameter
|
IO-Link Protocol |
|
|
Protocol Standard |
IO-Link V1.1 slave protocol |
|
Transfer Rate |
Default: COM2 (38.4kbps) |
|
Vendor ID |
0x0651 |
|
Device ID |
0x81622F (8479279) |
|
Communication Interface |
|
|
Port Definition |
M12 A-code 4 Pin, needle end |
|
Us Power Supply Rated |
24VDC |
|
Ua Power Supply Rated |
24VDC |
|
Us/Ua Galvanic Isolation |
Not support |
|
Module Consumption |
Max.50mA@24VDC |
|
IO Port |
|
|
Quantity |
8 ports, each containing two DI or DO, for a total of 16 |
|
Terminal Type |
8×M12, hole end |
|
Port Definition |
Pin1: 24V, positive of power output, provide by Us |
|
Digital Input |
|
|
Channel Indicator |
Support, green |
|
Input Feature |
Type 3, low level is valid (NPN) |
|
Rated Voltage |
24VDC |
|
Signal “0” |
-5V DC~+5V DC (Us power rail) |
|
Signal “1” |
-30V DC~- 11V DC (Us power rail) |
|
Minimum Voltage |
-30V DC |
|
Maximum Voltage |
+5V DC |
|
Input Current |
2.5mA (for the signal “1”, rated voltage input) |
|
Input Delay |
OFF to ON: Max.500μs |
|
Between Channels |
There is no isolation between channels |
|
Filter |
Configurable |
|
Digital Output |
|
|
Channel Indicator |
Support, green |
|
Output Type |
PNP, High level |
|
Load Capacity |
Resistive load: 0.5A |
|
Rated Output Current of |
350mA (single channel) |
|
Output Current of Module |
Max.3.6A |
|
Minimum Load Resistance |
48Ω |
|
Residual Current |
Max.10μA (for signal “0”) |
|
Output Delay |
OFF to ON: Max.100μs |
|
Switch Frequency |
Rated power resistive load: COM1: 10Hz; COM2: 35Hz; |
|
Potential Isolation |
No isolation between channels |
|
Diagnosis Function |
|
|
Status Display |
Power indicator, running state, communication state, |
|
Diagnosis Function |
Communication diagnosis |
|
Us power anti-reverse |
Support |
|
Us power overvoltage |
Support, Us>30VDC triggered |
|
Us power undervoltage |
Support, 9VDC≤Us≤18VDC triggered |
|
Dimension |
|
|
Dimension |
160 mm *60 mm *35.5 mm |
|
Weight |
305 g |
|
Configuration Method |
|
|
Master Configuration |
Support |
|
Software Configuration |
Support |
|
Environment Parameter |
|
|
Operating Temperature |
-30 ℃~60 ℃ |
|
Protection Grade |
IP67 |
|
Storage Temperature |
-40℃~85℃ |
|
Installation Altitude |
<2000m |
|
Pollution Degree |
聂 |
|
ESD |
Air discharge: ±15 kV, contact discharge: ±8 kV, |
|
EFT |
Power port: ±2 kV, communication port: ±2 kV, |
|
Surge |
Communication & IO Ports: ±1 kV DM, Power Ports: |
|
RS |
Executive Standards: IEC 61000-4-3 |
|
CS |
Executive Standards: IEC 61000-4-6 |
|
Product Certification |
CE certification |
A: The module supports 16 configurable digital input/output channels.
A: Both the digital input and digital output channels support PNP signals.
A: The IP-IA-16DINDON is suitable for factory automation, packaging machinery, smart manufacturing systems, distributed I/O applications, and industrial control systems.
The IP-IA-16DINDON is suitable for various industrial automation applications, including
Factory automation systems
Smart manufacturing equipment
Packaging machinery
Conveyor and material handling systems
Industrial sensor and actuator control
Distributed I/O systems
Production line automation
Logistics and warehouse systems
