Products
-
ODOT CN-8031：Modbus TCP Network Adapter
ODOT CN-8031 Modbus TCP Adapter CN-8031 Modbus TCP Network Adapter supports the standard Modbus TCP Server Communication, and Ethernet supports the cascade function of dual-port switches.This adapter supports access to 5 Modbus TCP clients simultaneously, supports Modbus function code 01/02/03/04/05/06/15/16 /23, supports the Modbus application of watchdog, supports the process data maximum sum of input and output of 8192 bytes, and supports number of the extension IO module of 32. Module carries with the diagnostic function and it could monitor the communication status of IO module in real time. Please watch our latest Remote IO video at youtube: https://www.youtube.com/watch?v=O86lTEV8UdM&pp=sAQA
-
ODOT CN-8021：CANopen Bus Adapter
CANopen is an open and flexible high-level protocol with more and more applications.
Based on the CAN bus, it combines low cost and high performance, and provides an attractive distributed control solution for industrial automation, medical devices, public transportation, elevators, maritime electronics, and other applications. -
CN-8013 CC-Link bus coupler IO network adapter
CN-8013 CC-Link bus adapter supports standard CC-Link Ver.2 communication and it could monitor the communication status of IO modules in real time.
-
ODOT-PNM02 V2.0 / V2.1: Modbus-RTU/ASCll or Non-standard protocol to ProfiNet Converter
ODOT-PNM02 V2.1
Modbus （master/slave, RTU/ASCII) to ProfiNET, 2 port serial port (RS485/ RS232 / RS422), supports 50 slots, 200 commands in TIA
portal (by configured software), support MAX 60 slaves
♦ Supports protocol conversion between Modbus and PROFINET
♦ Supports 2* RS485/RS232 or 1*RS422
♦ Supports Modbus master or slave, and supports RTU or ASCII
♦ Supports working temperature of -40〜85°C
♦ Supports data area: 2 serial Modbus-RTU/ASCII to PROFIBUS gateway with Max. input 1440 bytesand Max. output 1440 bytes
♦ Supports one key reset
♦ ODOT-PNM02 V2.0 supports Maximum slots: 50
♦ ODOT-PNM02 V2.1 supports 60 slaves (200 read and write commands)
-
BT-5102 2 channels orthogonal/pulse encoder input, 5V single-ended, Code : 5A
◆ The module supports two channels of encoder input.
◆ Each encoder channel supports A/B incremental encoder or pulse-directional encoder input.
◆ Each encoder channel supports orthogonal A/B signal input, input voltage 5V,and it supports source and sink input.
◆ The incremental encoder mode supports x1/ x2 / x4 frequency multiplication to be selectable.
◆ The pulse – direction mode supports nondirectional signal, pulse input only.
◆ Each encoder channel supports 1 digital input signal with an input voltage of 5Vdc or 24Vdc.
◆ Each encoder channel supports 1 digital output signal with an output voltage of 24Vdc.
◆ Each encoder channel supports 1 way of 5V power output, which can be connected to the encoder for power supply.
◆ The module internal bus and field input adopt magnetic isolation.
◆ The maximum input frequency of the encoder supported by the module is 1.5MHz.
◆ The module supports measurement function, it could detect the load speed or input signal frequency
-
BN-8032-L：Profinet COMM Board，Code: PL， supports no MRP, no IRT
The BN-8032 Profinet COMM board supports standard Profinet IO Device Communication.
The COMM board supports a max input of 1440 bytes, a max output of 1440 bytes;
The number of extended IO modules it supports is 2 or 4.
BOXIO B32 support 2 IO slots
BOXIO B64 support 2 IO slots
The difference with BN-8032 is without support MRP ,without IRT
-
BN-8032：Profinet COMM Board，Code:PN，supports MRP, IRT
The BN-8032 Profinet COMM board supports standard Profinet IO Device Communication.
The COMM board MRP media redundancy, and it could realize ring network redundancy.
And it supports RT/IRT real-time and synchronous communication mode, with its RT real-time communication minimum period of 1ms and IRT synchronous communication minimum period of 250us.
The COMM boardsupports a max input of 1440 bytes, a max output of 1440 bytes.
The number of extended IO modules it supports is 2 or 4.
For B32 BOX it can supports 2pcs of IO card
For B64 BOX it can supports 2pcs of IO card
-
BN-8011：Modbus-RTU COMM Board， Code: MR
The BN-8011 Modbus-RTU network adapter supports standard Modbus-RTU communication
01/02/03/04/05/06/15/16/23 function code.
This device could monitor the IO module communication state in real time.
-
BN-8031：Modbus-TCP COMM Board，Code: MT
BN-8031 Modbus-TCP COMM board supports standard Modbus-TCP server communication, and the Ethernet supports the
cascading function of dual network port switches.
The device supports the simultaneous access of 5 clients.
It supports 01/02/03/04/05/06/15/16 function code and Modbus application of watchdog.
The sum of process data input and output is up to 8192 bytes and it supports 4 extended I/O modules.
The module carries diagnostic function and it could monitor the communication status of the I/O module in real time.
It also supports input and output fault processing and network fault detection.
-
BN-8021：CANopen COMM Board，Code: CA
The BN-8021 CANopen network adapter module supports standard CANopen communication and supports device specifications
DS401. -
BN-8033：EtherCAT COMM Board, Code: EC
The BN-8033 EtherCAT I/O module supports standard EtherCAT protocol access.
The COMM board supports a max input of 1024 bytes and a max output of 1024 bytes.
The number of the extended IO modules it supports is 2 or 4.
B32 box shell support 2 IO slots
B64 box shell support 4 IO slots
-
BN-8034：Ethernet/IP COMM Board, Code: EP
The BN-8034 Ethernet/IP I/O module supports standard Ethernet/IP protocol access.
The COMM board supports a max input of 504 bytes and a max output of 504 bytes.
The number of extended I/O modules supported is 2 or 4.
B32 box shell support 2 IO slots
B64 box shell support 4 IO slots
