Tel: +86-0816-2538289
contact us
AIO BOX-MT124F: Integrated IO Module MODBUS 16DI
Product Model:AIO BOX-MT124F
Product Feature:

MiniBOXIO

♦AIOBOX-MT124F supports 16-channel DI, supports source and sink two-way Input, input voltage 24v/0v.
♦AIOBOX-MT222F supports 16-channel DO, high-level voltage is valid, output voltage 24v.
♦AIOBOX-MT623F supports 8-channel DI, supports source and sink two-way input, input voltage 24v/0v.
♦AIOBOX-MT623F supports 8-channel DO, high-level voltage is valid, output voltage 24v.
♦LED indicators for 16 channel input & output.
♦Two or three-wire digital sensor can be connected through input channel.
♦32-bit counter is supported by every input channel (frequency: <200Hz).
♦Thermal shutoff and overcurrent protection.
♦The bus inside the module and the field input are isolated by optical coupler.

  • Product Details
  • Technical Parameters
  • Applications
  • Product Details

    Product Introduction

    AIO BOX-MT124F is an integrated IO box based on Ethernet. It simultaneously supports RS485 interface (Modbus-RTU) and Ethernet interface (Modbus-TCP) for communication. This AIOBOX is easy for using with stable transmission, and it is designed with full metal case, strong anti-interference ability, inner PCB with anti-corrosion technique of anti - corrosion, anti - oxidation and salt-spray resistant. It supports double Ethernet port with daisy chain topology and easy for wiring.
    This series of modules have the access of the standard Modbus-TCP and Modbus-RTU/ASCII protocols, Ethernet supports the cascade function of dual-port switch, and serial port supports the RS485 bus connection mode. DI signals (such as emergency stop signal, travel switch, photoelectric switch, button switch input) can be collected from the field, and DO signals can be the output field control status (such as relay output, valve output, indicator light display).

    Product Characteristic

    MiniBOXIO

    ♦AIOBOX-MT124F supports 16-channel DI, supports source and sink two-way Input, input voltage 24v/0v.
    ♦AIOBOX-MT222F supports 16-channel DO, high-level voltage is valid, output voltage 24v.
    ♦AIOBOX-MT623F supports 8-channel DI, supports source and sink two-way input, input voltage 24v/0v.
    ♦AIOBOX-MT623F supports 8-channel DO, high-level voltage is valid, output voltage 24v.
    ♦LED indicators for 16 channel input & output.
    ♦Two or three-wire digital sensor can be connected through input channel.
    ♦32-bit counter is supported by every input channel (frequency: <200Hz).
    ♦Thermal shutoff and overcurrent protection.
    ♦The bus inside the module and the field input are isolated by optical coupler.

  • Technical Parameters

    General Parameters
    Dimension: 27.5*110*110mm
    System Power: 9-36 VDC (standard 24VDC)
    Isolation: isolation between power and IO
    Field Power: 22-28VDC (standard 24VDC)
    Field Current: Max. 8A
    Working Temperature: -30~75°C
    Humidity: 5%-95% (no condensation)
    IP Protection: IP20
    Wiring: Max.l.5mm2(AWG16)

    Modbus RS485 Specifications
    Protocol: Modbus RTU/ASCII
    Function Code: 01/02/03/04/05/06/15/16
    Baud Rate    : 2400~115200bps
    Station No: 1~247
    Data Bits: 7,8
    Check digit: None, even, odd
    Stop Bits: 1,2
    Max Length of Bus Wire: 1200m (RS485,2400 Baud rate)
    Interface of Rs485: 1-way plug type screw terminal

    Modbus-TCP Specifications
    Protocol: ModbusTCP
    Function Code: 01/02/03/04/05/06/15/16
    Connection Speed: 10/100 Mbps
    Max Length of Bus Wire: 100m
    Interface: RJ45*2
    IP Configuration: Software for AIOBOX

    Input Specifications
    Channel: 16-channel two-way input
    Indicator: LED for 16-channel input
    Threshold  Voltage ON: High: 10 VDC ~24 VDC (Com port: 0VDC) 
                                         Low:    0 VDC ~14 VDC (Com port: 24VDC)
    Threshold Voltage OFF- High: Max. 5VDC (Com port: 0VDC) 
                                         Low: Min. 19VDC (Com port: 24VDC)
    Current ON: Max. 15mA/channel@28VDC
    Input Impedance: >1.8kQ
    Input Delay: OFF to ON: Max. 3ms 
                        ON to OFF: Max 2ms
    Filtering time: 10ms
    Sampling frequency: 500Hz
    Counting Frequency: <200Hz

  • Technical Parameters