Tel: +86-0816-2538289
contact us
AIOBOX-MT222F:Modbus TCP/RTU/ASCII 16 DO
Product Model:AIOBOX-MT222F
Product Feature:

AIOBOX-MT222F

♦AIOBOX-MT222F supports 16-channel digital output, High Level On, output voltage 24V DC;
♦The module is with 16 pcs of DI&DO LED indicator;
♦The module input channel can be wired with the 2-Wire or 3-Wire digital sensor;
♦Each input channel of the module supports a 32-bit counter with the counting frequency <200Hz;
♦The module has the functions of Thermal Shutdown and Overcurrent Protection;
♦The internal Bus of the module and Field input adopts optocoupler isolation.

  • Product Details
  • Technical Parameters
  • Applications
  • Product Details

    AIOBOX-MT222F is an integrated IO box based on Ethernet with 16-channel Digital Output.
    It simultaneously supports RS485 interface (Modbus-RTU) and Ethernet interface (Modbus-TCP) for communication. This AIOBOX is easy for using with stable transmission, and it is designed with full metal case, strong anti-interference ability, inner PCB with anti-corrosion technique of anti - corrosion, anti - oxidation and salt-spray resistant. It supports double Ethernet port with daisy chain topology and easy for wiring.
    This series of modules have the access of the standard Modbus-TCP and Modbus-RTU/ASCII protocols, Ethernet supports the cascade function of dual-port switch, and serial port supports the RS485 bus connection mode. DI signals (such as emergency stop signal, travel switch, photoelectric switch, button switch input) can be collected from the field, and DO signals can be the output field control status (such as relay output, valve output, indicator light display).

    Product Characteristic

    AIOBOX-MT222F

    ♦AIOBOX-MT222F supports 16-channel digital output, High Level On, output voltage 24V DC;
    ♦The module is with 16 pcs of DI&DO LED indicator;
    ♦The module input channel can be wired with the 2-Wire or 3-Wire digital sensor;
    ♦Each input channel of the module supports a 32-bit counter with the counting frequency <200Hz;
    ♦The module has the functions of Thermal Shutdown and Overcurrent Protection;
    ♦The internal Bus of the module and Field input adopts optocoupler isolation.

  • Technical Parameters

    General Parameters
    Specification: 16 channels 24V Digital Output, supports source output;
    Communication interface: dual Ethernet port, with switch function, support device cascade,1 Modbus-RTU RS485 interface
    Input voltage: 9-36V DC, Wide Input Voltage
    Working Temperature : -40~85℃
    Baud rate: 1200 ~115200bps
    Protection level : IP20
    RS485 nodes: Max. 32
    Power: Max.116mA@24Vdc
    Size: 110*27.5*110mm(LxHxW)
    Installation: DIN-rail  35mm standard

    Output parameters
    Number of channels : 16 channels
    Indicator: 16 pcs of green channel output indicator 
    Rated current:  typical value - 1A
    Output impedance: < 1.2 Ω
    Output delay :OFF to ON :Max.200us
                          ON the to OFF: Max. 100 us
    Protection function: over temperature off - typical value is 150℃
    Overcurrent protection: Max. 3A
    Short circuit protection support

     

  • Technical Parameters