◆2 Ethernet Ports, with switch function, supports cascade
◆2KV Ethernet Port isolation protection, 10M/100Mbps rate adaptation, (Auto-MD/MDIX)
◆Supports for connection to Siemens200PLC, Omron HOSTLINK Protocol PLC, Mitsubishi FX Protocol PLC, Delta ModBUS Protocol PLC
◆Supports simultaneous connection of 5 Modbus-TCP/IP clients
◆Supports 200 collection points, supports MQTT connection to Cloud
◆4 Serial Port Real-time refresh, Short Scanning Cycle, Strong Load Capacity
◆Supports bridge mode, collecting PLC data without affecting the communication between PLC and HMI
◆Supports IAP download, through the Ethernet port to update the firmware program in the product
◆Supports one-key reset function, restore factory settings
◆EMC complies with EN 55022:2010 & EN55024:2010 international standards
- Product Details
- Technical Parameters
- Applications
-
Product Details
Product Introduction:
MG-IOT01 is a protocol converter from PLC protocol to ModBus-TCP/IP and MQTT. All devices with RS485/RS422/RS232 interface and supports Siemens(PPI), Omron(HOSTLINK), Mitsubishi(FX2N),Delta(MODBUS) and other devices could connect to Modbus-TCP/IP network through this converter, and to the Cloud through MQTT.
Thus, the low-speed serial port equipment could be connected to high-speed Ethernet and Cloud server to realize the function of industrial data collection. Gateway has two different working modes of " straight through" and "bridge" mode. Gateway in "straight through" mode is directly connected to PLC for data collection, and "bridge" mode could be used for data collection when it is compatible with the original PLC communication to HMI without adding more communication interfaces.Product Characteristic◆2 Ethernet Ports, with switch function, supports cascade
◆2KV Ethernet Port isolation protection, 10M/100Mbps rate adaptation, (Auto-MD/MDIX)
◆Supports for connection to Siemens200PLC, Omron HOSTLINK Protocol PLC, Mitsubishi FX Protocol PLC, Delta ModBUS Protocol PLC
◆Supports simultaneous connection of 5 Modbus-TCP/IP clients
◆Supports 200 collection points, supports MQTT connection to Cloud
◆4 Serial Port Real-time refresh, Short Scanning Cycle, Strong Load Capacity
◆Supports bridge mode, collecting PLC data without affecting the communication between PLC and HMI
◆Supports IAP download, through the Ethernet port to update the firmware program in the product
◆Supports one-key reset function, restore factory settings
◆EMC complies with EN 55022:2010 & EN55024:2010 international standards -
Technical Parameters
Mechanical Properties:
Size: 27.5*110*110mm
WTP: -40~85℃
Input Voltage: 9~36VDC
Consumption: Max.200mA@24V
Serial Port Parameters:
Serial Port supported: 4-way RS485/RS232 OR 2-way RS422
Communication Mode: 4PLC protocols optional
Baud Rate: 2400~115200 bps
Check Pattern: No Check, Odd, Even
Slave Stations supported: Max 124(without REPEATER
Data Points supported: 200
Ethernet Parameters:
Working Mode: Transparent Transmission / Address Mapping/ModBus-TCP
Interface Quantity: 2RJ45, 10M/100M adaptive rate, with switch function
Network Protocol: EtherNet, ARP,IP,TCP,ICMP,MQTT
TCP connections: Max 5
Technical Parameters:
Supports MQTT to Cloud
Supports data sort exchange
Supports data type conversion
Supports data caculation
Watchdog optional enable, watchdog time could be set
External terminal resistance and bias circuit, strong stability
Data package sending interval could be free adjusted, more flexible usage
Installation: 35mm Din-rail
Power Port Quantity: 1
Certificate and Warranty:
Certificate: EMC, CE
Warranty: 3 years, providing configuration software -
Technical Parameters
Applicaiton Topology