Tel: +86-0816-2538289
contact us
IOT02 plus:IIOT Gateway
Product Model:IOT02 +
Product Feature:

IOT02+ is a powerful IIOT gateway, could help collect the data from CNC and transmit via cloud.
It supports functions as below:
1. 4G  2. WiFi   3. MQTT   4.  Modbus RTU/TCP 5. data storage 6. CNC data collection 7. MQTT to the cloud.

  • Product Details
  • Technical Parameters
  • Applications
  • Product Details

    Product Characteristic

    IOT02+ is a powerful IIOT gateway, could help collect the data from CNC and transmit via cloud.
    It supports functions as below:
    1. 4G  2. WiFi   3. MQTT   4.  Modbus RTU/TCP 5. data storage 6. CNC data collection 7. MQTT to the cloud.

  • Technical Parameters

    Hardware parameters:
    CPU: ARMA7, Frequency at 528MHz
    Memory: 256MB, DDR3
    Storage: 256MB, can expand the storage through the card slot
    Network port: 2 ways 10/100Mbps auto-negotiation, support routing function
    Serial port: 2 serial ports, serial port 1 supports RS485, RS422, RS232, serial port 2 supports RS485
    WIFI: 2.4GHz frequency band, 1T1R, supports IEEE802.11b/g/n, 150Mbps
    4G: Supports LTE-FDD, LTE-TDD, EDGE and GPRS network data connection, support maximum downstream rate of 10Mbps and maximum up stream rate of 5Mbps (it could replace 4G modules with different parameters according to needs)
    Peripherals: 6 status indicators, 2 buttons (WIFI parameter reset, system configuration reset)
    Power supply: DC9~36V, power consumption is less than 0.5A@24V

    The main function:
    1. Protocol conversion: support data collection of various types of equipment such as PLC, CNC, etc., and convert it to HTTP, MQTT or Modbus-TCP
    2. VPN transparent transmission: with VPN technology, it can realize remote PLC online diagnosis and programming debugging directly through the MG-IOT02+
    3. Cloud management: support the cloud platform to manage the MG-IOT02+, count the online status of the MG-IOT02+, and modify its configuration.
    4. Multiple Internet access methods: supports Ethernet, WIFI or 4G 
    5. WIFI mode can be switched: supports STA or AP mode

    Serial instrument(Modbus-RTU), Serial port PLC(Siemens, Mitsubishi, Omron, Delta), Ethernet interface PLC(Siemens, AB, Mitsubishi, Omron), CNC machine tools(FANUC, Mitsubishi, Siemens, Syntec and Brother)

  • Technical Parameters