CN-8013 CC-Link bus coupler IO network adapter
CN-8013 CC-Link bus adapter supports standard CC-Link Ver.2 communication and it could monitor the communication status of IO modules in real time.
| Adapter Hardware Parameter | |
|
System Power |
Nominal:24Vdc, Range: 9-36VdcReverse Protection: YES |
|
Power Consumption |
110mA@24Vdc |
|
Internal Bus Supply Current |
Max：2.5A@5Vdc |
|
Isolation |
System Power to Field Power Isolation |
|
Power Supply |
Nominal:24Vdc, Range:22-28Vdc |
|
Field Power Current |
Max. DC 8A |
|
IO Modules Supported |
32pcs |
|
Wiring |
Max.1.0mm² (AWG 17) |
|
Mounting Type |
35mm DIN-Rail |
|
Size |
115*51.5*75mm |
|
Weight |
130g |
| Environment Specification | |
|
Operation Temperature |
-40~85℃ |
|
Operation Humidity |
5%-95% ( No Condensation) |
|
Ingress Protection Rating |
IP20 |
| CC-Link Parameter | |
|
Protocol |
CC-Link Ver.2 |
|
Station Type |
Remote device station |
|
Number of Logical Stations Occupied |
1, 2, 3, 4 |
|
Extended Loop Setup |
1 time, 2 times, 4 times, 8 times |
|
I/O Data Capacity |
RX/RY capacity（bit）max. 896RWr/RWw capacity（word）max. 128 |
|
Baud Rate |
156K/625K/2.5M/5M/10Mbps |
|
Node Station (Station No.) |
1~64(DIP switch configuration)，when DIP switch value is not 1~64, and the mandatory station number is 1. |
|
Interface |
5 Pin screw terminal |
|
Max. bus length |
1200m（156kbps） |
|
Terminal resistance |
120ohm |
Write your message here and send it to us
