B Series integrated BOXIO
-
BT-5102 2 channels orthogonal/pulse encoder input, 5V single-ended, Code : 5A
◆ The module supports two channels of encoder input.
◆ Each encoder channel supports A/B incremental encoder or pulse-directional encoder input.
◆ Each encoder channel supports orthogonal A/B signal input, input voltage 5V,and it supports source and sink input.
◆ The incremental encoder mode supports x1/ x2 / x4 frequency multiplication to be selectable.
◆ The pulse – direction mode supports nondirectional signal, pulse input only.
◆ Each encoder channel supports 1 digital input signal with an input voltage of 5Vdc or 24Vdc.
◆ Each encoder channel supports 1 digital output signal with an output voltage of 24Vdc.
◆ Each encoder channel supports 1 way of 5V power output, which can be connected to the encoder for power supply.
◆ The module internal bus and field input adopt magnetic isolation.
◆ The maximum input frequency of the encoder supported by the module is 1.5MHz.
◆ The module supports measurement function, it could detect the load speed or input signal frequency
-
BT-623F 8DI sink/source & 8DO source 24VDC expansion I/O card Code: V
The BOX I/O module card of BT-623F
with 8 channels / digital input, source & sink /NPN&PNP/ 24VDC,
with 8 channels / digital output / source / PNP /, 24Vdc/0.5A
supports counter function (counter frequency up to 200Hz)
-
BT-4234：4-channel analog output /0&4-20mA/15-bit/16-bit/ single ended, Code: P
◆ 0-20mA or 4-20mA, the two output ranges can be set.
◆ the module internal bus and field output adopts magnetic insulation.
◆ single-terminal grounded together output mode.
◆ the module supports the channel open circuit overload warning function to the corresponding channel.
◆ the module supports LCD display of basic module information and channel indicator display parameters.
-
BT-3804：4 channels analog input / TC / 24bits / Thermocouple temperature acquisition module, Code: F
Module features
◆ the module supports 4-channel thermocouple signal acquisition.
◆ the module supports 9 kinds of conventional thermocouple temperature measurement type.
◆ the internal bus of the module and field input adopts magnetic isolation.
◆ The module input channel supports TVS overvoltage protection.
◆ 24-bit ADC resolution (Σ-δ type).
◆ the module supports separately disabling specific channels to improve the acquisition speed.
◆ the module supports LCD display of basic module information and channel indicator display parameters. -
BT-3714：4 channels / RTD input / PT100 / 15bits / Temperature acquisition module, Code: D
◆ the module supports 4-channel RTD thermal resistance (PT100) temperature acquisition.
◆ the module could be connected to a 2-wire or 3-wire PT100 temperature sensor.
◆ the internal bus of the module and field input adopts magnetic isolation.
◆ 15-bit ADC resolution ratio.
◆ the module supports separately disabling specific channels to improve the acquisition speed.
◆ the module supports LCD display of basic module information and channel indicator display parameters.
-
BT-3244：4 channels / current input / 0&4-20mA, ±20mA, 15 bits, Single-ended bipolar, Code: C
◆ the module supports 4-channel current signal acquisition.
◆ the module can be configured for 0-20mA, 4-20mA and ±20mA current signal acquisition.
◆ the module supports 2-wire (non-loop output, external power supply is required) current sensor input.
◆ the internal bus of the module and field input adopts magnetic insulation.
◆ the module input channel could be connected to the field active analog signal current output sensor.
◆ the module channel equips with TVS overvoltage protection.
◆ the module supports separately disabling specific channels to improve the acquisition speed.
◆ the module supports LCD display of basic module information and channel indicator display parameters.
-
BT-3238：8 channels / current input /0&4-20mA, 15-bits, single ended, Code: B
◆ the module supports 8-channel current signal acquisition.
◆ the module can be configured for 0-20mA or 4-20mA current signalacquisition.
◆ the module supports 2-wire (non-loop output, external power supply is required) or 4-wire current sensor input.
◆ the internal bus of the module and field input adopts magnetic insulation.
◆ the module input channel could be connected to the field active analog signal current output sensor.
◆ the module channel equips with TVS overvoltage protection.
◆ the module supports separately disabling specific channels to improve the acquisition speed.
◆ the module supports LCD display of basic module information and channel indicator display parameters.
-
BT-222F：16 channel / digital output / 24VDC / source, Code: 6
◆ the module supports 16 channels digital output, and the output voltage is 24VDC and the output high level is valid.
◆ the module can drive field equipment. (relay, solenoid valve, etc.)
◆ the internal bus of the module and field output are using opto-coupler.
◆ the module has the functions of thermal shutdown and overcurrent protection.
◆ the module supports short circuit protection and overload protection warning functions to corresponding channels.
◆ the module supports LCD display of basic module information and channel indicator display parameters.
◆ the module supports the fault output processing function when the application layer is disconnected.
-
BT-221F：16 channel / digital output / 24VDC / sink, Code: 5
Module features
◆ the module supports 16 channels digital output; the output voltage is 0V and the output low level is valid.
◆ the module can drive field equipment (relay, solenoid valve, etc.).
◆ the internal bus and field output of the module both adopt electromagnetic isolation.
◆ the module has the function of thermal shutdown and over current protection.
◆ the module supports the short circuit warning function to the corresponding channel.
◆ the module supports the fault output processing function when the applicationlayer is disconnected.
-
BT-124F：16 channel digital input / 24VDC /Sink/Source dual direction, Code: 1
◆ the module supports 16 channels digital input, supports sink type & source
type input. The input high level (sink type) is valid and the module it could be
connected to PNP sensor while the input low level (source type) is valid, and the
module it could be connected to NPN sensor.◆ the module can collect digital output signal of field equipment (dry contact or active output).
◆ the module can be accessed to 2-wire or 3-wire digital sensor.
◆ the internal bus and field input of the module adopts opto-isolator.
◆ the module supports the input signal holding function, and the holding time can be set.
◆ by adding counting sub-module, the counting function is valid.
◆ each input channel of the module supports a 32-bit counter with the counting frequency <200Hz.
◆ the module can be set the digital signal input filtering time and the byte transmission order of the counter.
◆ each channel of the module could be set the counting mode and counting direction independently.
◆ the module supports LCD display of basic module information and channel indicating display parameters
-
BN-8034：Ethernet/IP COMM Board, Code: EP
The BN-8034 Ethernet/IP I/O module supports standard Ethernet/IP protocol access.
The COMM board supports a max input of 504 bytes and a max output of 504 bytes.
The number of extended I/O modules supported is 2 or 4.
B32 box shell support 2 IO slots
B64 box shell support 4 IO slots
-
BN-8033：EtherCAT COMM Board, Code: EC
The BN-8033 EtherCAT I/O module supports standard EtherCAT protocol access.
The COMM board supports a max input of 1024 bytes and a max output of 1024 bytes.
The number of the extended IO modules it supports is 2 or 4.
B32 box shell support 2 IO slots
B64 box shell support 4 IO slots
