General parameters
Power | Max.82mA@5.0VDC |
Isolation | Channel and system power isolation voltage: AC 500V Channel and on-site power supply isolation voltage: AC 500V
Channel and PE isolation voltage: AC 500V |
On-site power supply | Nominal: 24VDC Input range: 22~28VDC
Voltage is lower than 15~17V alarm |
Connection | Max.1.0mm²(AWG 17)Min:0.2mm²(AWG 24) |
Installation: | 35mmDIN-Rail |
Size: | 115*27*75mm |
Weight | 130g |
Vibration Resistance | Comply with IEC 61131-2 and IEC 60068-2-6 |
Impact Resistance | Comply with IEC 61131-2 and I IEC 60068-2-27 |
EMC Performance | Comply with IEC 61131-2 and I IEC 61000-4 |
Environment Specification
Operating Temperature of Horizontal Installation |
-35℃~70℃ |
Operating Temperature of Vertical Installation |
-35℃~60℃ |
Relative Humidity |
< 95%RH non-condensing |
Storage Temperature | -40℃~85℃ |
Storage Humidity | < 95%RH non-condensing |
Manufacturing Test Temperature | -40℃~75℃ |
Ingress Protection Rating | IP20 |
Output Parameters
Number of Channels | 32 channels |
LED Indicator | 32 panel LEDs and 32 channel LEDs, all green |
Current Rating | Single-channel current: Max.1ACurrent per channel: 0.5A |
Leakage Current | Maximum: 5uA |
On-resistance | Typical: 260mΩ |
Output Delay | OFF to ON: Max.100usON to OFF: Max.150us |
Protection Features | Over temperature shutdown: typical value of 150 ℃Overcurrent protection: 1.3-1.8A
Short circuit protection: supported Channel isolation protection |
The Type of Load | Resistive load, inductive load, lamp load (incandescent lamp) |
Output type | Source type output/high edge output |