C series remote I/O

CT-3713: 3-channel RTD-PT100 temperature acquisition module

CT-3713: 3-channel RTD-PT100 temperature acquisition module

Module features

◆ The module supports 3-channel RTD thermal resistance (PT100) temperature acquisition

◆ The module could be connected to a 2-wire or 3-wire PT100 temperature sensor

◆ The internal bus of the module and field input adopts magnetic isolation

◆ The module carries with 3 analog input channel LED indicator

◆ 15-bit ADC resolution

inquiry detail
CT-4158: 8 channels Voltage Output 0~5VDC/0~10VDC/±5VDC/±10VDC, 16bits

Module features

◆The module supports 8 channels voltage signal output

◆ Output range： 0~5VDC, 0~10VDC, ±5VDC, ±10VDC， 16 bits

◆ The module carries with 8 analog output LED indicators

◆ Module output signal is single – ended common – grounded output

inquiry detail
CT-3808: 8 channels Analog Input,Thermocouple

CT-3808: 8 channels Analog Input,Thermocouple（ J type, K type, E type, T type, Stype, R type, B type, N type）

◆ The module supports 8-channel thermocouple signal acquisition

◆ The module carries 8 analog LED indicators

◆ The module supports 9 kinds of conventional thermocouple temperature measurement type

◆ The internal bus of the module and field input adopts magnetic isolation

◆ The module input channel supports TVS overvoltage protection

◆ 24-bit ADC resolution (Σ-δ type)

inquiry detail
CT-4234: 4-channel analog output

Product Model：CT-4234: 4-channel analog output /0&4-20mA/16-bit single-terminal Module features

IO Config V1.0.0.6(Fully with .NET4.0.rar|CT-3804.pdf

◆ 2 output ranges can be set(0-20mA、4-20mA)

◆ The module internal bus and field output adopts magnetic insulation

◆ Single-terminal grounded together output mode

inquiry detail
CT-3238: 8-channel analog input

CT-3238: 8-channel analog input /0&4-20mA/15-bit single-terminal

◆ The module supports 8-channel current signal acquisition.

◆ The module can be configured for 0-20mA or 4-20mA current signal acquisition.

◆ The module supports 2-wire (non-loop output, external power supply required) or 4-wire current sensor input.

◆ The internal bus of the module and field input adopts magnetic insulation.

◆ The module input channel is connected to the field active analog signal current output sensor.

◆ The module channel equips with TVS overvoltage protection.

inquiry detail
CT-3268 8 channels analog input /0～20mA OR -20~0mA OR ±20mA /15bit Single-ended bipolar

CT-3268: 8 channels analog input /0～20mA OR -20~0mA OR ±20mA /15bit Single-ended bipolar

◆ the module supports 8-channel current signal acquisition.

◆ the module can be configured for 0~20mA OR -20~0mA OR ±20mA current signal acquisition.

◆ the module supports 2-wire (non-loop output, external power supply is required)

◆ the internal bus of the module and field input adopts magnetic insulation.

◆ the module input channel is to be connected to the field active analog signal current output sensor.

◆ the module channel equips with TVS overvoltage protection.

inquiry detail
CT-5102 2-channel encoder input /5VDC

Module features

◆ the module supports two channels of encoder input.

◆ each encoder channel supports A/B incremental encoder or pulse-directional encoder input.

◆ each encoder channel supports orthogonal A/B signal input, input voltage 5V, and it supports source and sink input.

◆ the incremental encoder mode supports x1/ x2 / x4 frequency multiplication to be selectable.

◆ the pulse – direction mode supports nondirectional signal, pulse input only.

◆ each encoder channel supports 1 digital input signal with an input voltage of 5Vdc or 24Vdc.

◆ each encoder channel supports 1 digital output signal with an output voltage of 5Vdc.

◆ each encoder channel supports 1 way of 5V power output, which can be connected to the encoder for power supply.

◆ the module internal bus and field input adopt magnetic isolation.

◆ the module carries 16 LED indicators.

◆ the maximum input frequency of the encoder supported by the module is 1.5MHz.

◆ the module supports measurement function, it could detect the load speed or input signal frequency.

inquiry detail
CT-5122 2-channel encoder/SSI input

Module features

◆ the module supports two channels of SSI encoder input.

◆ each encoder channel supports SSI absolute encoder signal input.

◆ each encoder channel supports 1 digital input signal with an input voltage of 5Vdc or 24Vdc.

◆ each encoder channel supports 1 digital output signal with an output voltage of 5Vdc.

◆ the module internal bus and field input adopt magnetic isolation

◆ the module carries 16 LED indicators.

◆ the module supports the maximum clock frequency of 2MHz.

◆ the encoder reading interval time could be set.

◆ The data bit length and the start and end bit positions could be set.

inquiry detail
CT-5142 2-channel encoder /differential input

Module features

◆ the module supports two channels of encoder input.

◆ each encoder channel supports A/B incremental encoder or pulse-directional encoder input.

◆ each encoder channel supports orthogonal A/B differential signal input, voltage output range 0-5V.

◆ the incremental encoder mode supports x1/ x2 / x4 frequency multiplication mode.

◆ the pulse – direction mode supports nondirectional signal, pulse input only.

◆ each encoder channel supports 1 digital input signal with an input voltage of 5Vdc or 24Vdc.

◆ each encoder channel supports 1 digital output signal with an output voltage of 5Vdc.

◆ the module internal bus and field input adopt magnetic isolation.

◆ the module carries 16 LED indicators.

◆ the maximum input frequency of the encoder supported by the module is 10MHz.

◆ the module supports measurement function, it could detect the load speed or input signal frequency.

inquiry detail