C series remote I/O
-
CT-124H：32 channels digital input/24VDC/Sink or Source type
CT-124H: 32 channels digital input, sink or source, 34Pin male connector, 24Vdc, counting function supported (counting frequency up to 200Hz)
◆ the module supports 32 channels digital input, it supports sink input and the input high level is valid as it could support PNP sensor; it also supports source input and the input low level is valid as it could support NPN sensor.
◆ the module could collect the digital output signal of field equipment (dry contact or active output).
◆ the module could be connected to 2-wire or 3-wire digital sensor.
◆ the internal bus of the module and field input are isolated by optocoupler.
◆ the module supports input signal holding function, holding time can be set.
◆ after adding counting submodule in ODOT configured software, the counting function is effective.
◆ each input channel of the module supports 32-bit counter with counting frequency <200Hz.
◆ the module could be set the digital signal input filter time and counter byte transmission sequence.
◆ each channel of the module could be set the counting mode and counting direction independently
-
CT-222D 32 channels digital output/24VDC/Sink
◆ The module supports 32 channels digital output; the output voltage is 24VDC and the output high level is valid.
◆ Module can drive field equipment. (relay, solenoid valve, etc.)
◆ The internal bus of the module and field output are using opto-coupler.
◆ The module carries 32 digital output channel LED indicator light.
◆ The module has the functions of thermal shutdown and overcurrent protection.
◆The module supports short circuit protection and overload protection.
-
CT-1218 8 channels digital input/24VDC/PNP
CT-1218: 8 channels digital input/24VDC/PNP
◆the module supports 8 channels digital input, supports sink input，and the input voltage is 24VDC and the input high level is valid. It could support PNP sensor.
◆the module could collect digital output signal of field equipment (dry contact or active output).
◆the module could be accessed to 2-wire or 3-wire digital sensor.
◆the internal bus and field input of the module use opto-isolator.
◆the module supports the input signal holding function, and the holding time can be set.
◆the module carries 8 digigtal input channels with LED indicator on each channel.
◆supports counting function, by adding counting sub-module.
◆each input channel of the module supports a 32-bit counter with the counting frequency <200Hz.
◆the module could be set the digital signal input filtering time and the byte transmission order of the counter.
◆each channel of the module could be set the counting mode and counting direction independently.
-
CT-1228 8 channels digital input/24VDC/NPN
CT-1228: 8 channels digital input/24VDC/NPN ◆ the module supports 8 channels digital input, and the input low level is valid. It could support NPN sensor. ◆ the module could collect digital output signal of field equipment (dry contact or active output). ◆ the module could be accessed to 2-wire or 3-wire digital sensor. ◆ the internal bus and field input of the module use opto-isolator. ◆ the module supports the input signal holding function, and the holding time can be set. ◆ the module carries 8 digigtal input channels with LED indicator on each channel. ◆ supports counting function after adding counting sub-module. ◆ each input channel of the module supports a 32-bit counter with the counting frequency <200Hz. ◆ the module could be set the digital signal input filtering time and the byte transmission order of the counter. ◆ each channel of the module could be set the counting mode and counting direction independently.
-
CT-222H: 32 channels digital output, source, 24Vdc/0.5A，34Pin male connector
CT-222H: 32 channels digital output, source, 24Vdc/0.5A，34Pin male connector
◆ the module supports 32 channels digital output; the output voltage is 24VDC and the output high level is valid.
◆ module can drive field equipment. (relay, solenoid valve, etc.)
◆ the internal bus of the module and field output are using opto-coupler.
◆ the module carries 32 digital output channel LED indicator light.
◆ the module has the functions of thermal shutdown and overcurrent protection.
◆ the module supports short circuit protection and overload protection.
-
CT-2228: 8 channel digital output/24VDC/ Source type
Module features
◆ the module supports 8-channel digital output, output high level effective, and output voltage 24V
◆ the module could drive field equipment (relay, solenoid valve, etc.)
◆ the module internal bus and field output are isolated by optocoupler
◆ the module carries with 8 digital output channel LED indicator
◆ the module has the functions of thermal shutdown and overcurrent protection
◆ the module supports short circuit protection and overload protection
-
CT-2218 8 channels digital output/24VDC/NPN
◆The module supports 8-channel digital output,
the output voltage is 0VDC and the output low level is valid.
◆The module could drive field equipment (relay, solenoid valve, etc.).
◆The module internal bus and field output are isolated by optocoupler.
◆The module carries with 8 digital output channel LED indicator.
◆The module has the functions of thermal shutdown and short-circuit protection.
-
CT-2224: 4 channel digital output/24VDC/ Source type
CT-2224: 4 channel digital output/24VDC/ Source type
◆the module supports 4-channel digital output, the output voltage is 24VDC and the output high level is valid.
◆the max output current of DO single channel is 3.3 A.
◆the module could drive field equipment (relay, solenoid valve, etc.)
◆the module internal bus and field output are isolated by optocoupler
◆the module carries with 4 digital output channel LED indicator
◆the module has the functions of thermal shutdown and overcurrent protection
◆the module supports short circuit protection and overload protection
-
CT-2718: 8 channel relay output 2A/30VDC/60W
IO Config V1.0.0.6(Fully with .NET4.0.rar|CT-2718.pdf
CT-2718: 8 channel relay output 2A/30VDC/60W
Module features
◆ 8-channel relay normally on output
◆ 8 LED channel indicators
◆ Low on resistance (≤100mΩ)
◆ 250VAC/220VDC the max. switch voltage is 250VAC/220VDC
-
CT-3168: 8 channel Voltage Input
CT-3168 8 channel Voltage Input 0~5/0~10/±5/±10VDC, 15Bit/16 Bit
Module features
◆ the module supports 8 channels of voltage signal input
◆ the module could collect 0~5VDC, 0~10VDC, ±5VDC, ±10VDC, with a 15-bit or 16-bit resolution
◆ The module carries with 8 analog input channel LED indicator
◆ The module input signal is a single ended common grounding input
◆ filter time could be set
◆ channels could be disabled independently
-
CT-3804: 4 channels Analog Input
CT-3804: 4 channels Analog Input, Thermocouple(J type, K type, E type, T type, Stype, R type, B type, N type)
Module features
◆ The module supports 4-channel thermocouple signal acquisition
◆ The module carries with 4 analog indicators
◆ The module supports 9 kinds of conventional thermocouple temperature measurement type
◆ The internal bus of the module and field input adopts magnetic isolation
◆ The module input channel supports TVS overvoltage protection
◆ 24-bit ADC resolution (Σ-δ type)
-
CT-4154: 4 channels Voltage Output 0~5VDC/0~10VDC/±5VDC/±10VDC,16 bits
CT-4154 4 channels Voltage Output 0~5VDC/0~10VDC/±5VDC/±10VDC,16 bits
Module features
◆The module supports 4 channels voltage signal output
◆ Output range： 0~5VDC, 0~10VDC, ±5VDC, ±10VDC, 16 bits
◆ The module carries with 4 analog output LED indicators
◆ Module output signal is single – ended common – grounded output
