Products
-
B32 Series Modular integrated IO
ODOT B series integrated I/O module
ODOT B series integrated I/O module consists of communication board (COMM board) module and extended IO module. The COMM board could select the corresponding bus module according to the communication interface of the controller system. The mainstream industrial communication protocols include Modbus, Profibus-DP, Profinet, EtherCAT, EtherNet/IP, CANopen, CC-Link, PowerLink, etc. The extended I/O module is divided into six categories: digital input module, digital output module, analog input module, analog output module, special module, and hybrid I/O module.
The COMM board and extended IO modules could be freely combined based on site requirements. The integrated IO module could lower the cost when there are few data points.
-
CT-222F: 16 channel digital output/24VDC/source type
CT-222F 16 channel digital output/24VDC/source type/output 24VDC, the output high level is valid
Module features
◆ the module supports 16 channels digital output, the output high level is valid, the output voltage is 24VDC.
◆ module can drive field equipment. (relay, solenoid valve, etc.)
◆ the internal bus of the module and field output are using opto-coupler.
◆ the module has 16 digital output channel LED indicator light.
◆ the module has the functions of thermal shutdown and overcurrent protection.
◆ the module supports short circuit protection and overload protection.
-
CT-122F: 16 channels digital input/0VDC/Source type
CT-122F 16 channels digital input/0VDC/Source type/Input 0V, the input low level is valid
Module features
◆ the Module supports 16 channels digital input, supports source input, the input voltage is 0V and the input low level is valid.
◆ the module could collect the digital output signal of field equipment (dry contact or active output).
◆ the module can be connected to a 2-wire or 3-wire digital sensor.
◆ the internal bus of the module and field input are isolated by optocoupler.
◆ the module supports input signal holding function, holding time can be set.
-
CT-124D 32-channel digital input/24VDC/Sink or Source
◆ The module supports 32 channels of digital input, supports high-level input, and could be connected to PNP sensor, and supports low-level input, and could be connected to NPN sensor.
◆ The module can collect the digital output signal (dry contact or active output) of the field device.
◆ The module can be connected to 2-wire or 3-wire digital sensor.
◆ The internal bus and field input of the module are isolated by optocoupler.
◆ The module supports the input signal holding function, and the holding time can be set.
◆ After adding the counting submodule, the counting function is available.
◆ Each input channel of the module supports 32-bit counter, and the counting frequency < 200Hz.
◆ The module can set the digital signal input filtering time and counter byte transmission sequence.
◆ The module can independently set the counting mode and counting direction for each channel.
-
CT-221F: 16 channels digital output/24VDC/Sink type
CT-221F 16 channels digital output/24VDC/Sink type/output is 0V, the output low level is valid
Module features
◆ the module supports 16 channels digital output, the output voltage is 0V and the output low level is valid.
◆ the module can drive field equipment (relay, solenoid valve, etc.)
◆ the internal bus and field output of the module both adopt electromagnetic isolation
◆ the module carries 16 digital output channel LED indicator
◆ the module has the function of thermal shutdown and over current protection
-
CT-222D 32 channels digital output/24VDC/Sink
◆ The module supports 32 channels digital output; the output voltage is 24VDC and the output high level is valid.
◆ Module can drive field equipment. (relay, solenoid valve, etc.)
◆ The internal bus of the module and field output are using opto-coupler.
◆ The module carries 32 digital output channel LED indicator light.
◆ The module has the functions of thermal shutdown and overcurrent protection.
◆The module supports short circuit protection and overload protection.
-
CT-124H：32 channels digital input/24VDC/Sink or Source type
CT-124H: 32 channels digital input, sink or source, 34Pin male connector, 24Vdc, counting function supported (counting frequency up to 200Hz)
◆ the module supports 32 channels digital input, it supports sink input and the input high level is valid as it could support PNP sensor; it also supports source input and the input low level is valid as it could support NPN sensor.
◆ the module could collect the digital output signal of field equipment (dry contact or active output).
◆ the module could be connected to 2-wire or 3-wire digital sensor.
◆ the internal bus of the module and field input are isolated by optocoupler.
◆ the module supports input signal holding function, holding time can be set.
◆ after adding counting submodule in ODOT configured software, the counting function is effective.
◆ each input channel of the module supports 32-bit counter with counting frequency <200Hz.
◆ the module could be set the digital signal input filter time and counter byte transmission sequence.
◆ each channel of the module could be set the counting mode and counting direction independently
-
CT-1218 8 channels digital input/24VDC/PNP
CT-1218: 8 channels digital input/24VDC/PNP
◆the module supports 8 channels digital input, supports sink input，and the input voltage is 24VDC and the input high level is valid. It could support PNP sensor.
◆the module could collect digital output signal of field equipment (dry contact or active output).
◆the module could be accessed to 2-wire or 3-wire digital sensor.
◆the internal bus and field input of the module use opto-isolator.
◆the module supports the input signal holding function, and the holding time can be set.
◆the module carries 8 digigtal input channels with LED indicator on each channel.
◆supports counting function, by adding counting sub-module.
◆each input channel of the module supports a 32-bit counter with the counting frequency <200Hz.
◆the module could be set the digital signal input filtering time and the byte transmission order of the counter.
◆each channel of the module could be set the counting mode and counting direction independently.
-
CT-1228 8 channels digital input/24VDC/NPN
CT-1228: 8 channels digital input/24VDC/NPN ◆ the module supports 8 channels digital input, and the input low level is valid. It could support NPN sensor. ◆ the module could collect digital output signal of field equipment (dry contact or active output). ◆ the module could be accessed to 2-wire or 3-wire digital sensor. ◆ the internal bus and field input of the module use opto-isolator. ◆ the module supports the input signal holding function, and the holding time can be set. ◆ the module carries 8 digigtal input channels with LED indicator on each channel. ◆ supports counting function after adding counting sub-module. ◆ each input channel of the module supports a 32-bit counter with the counting frequency <200Hz. ◆ the module could be set the digital signal input filtering time and the byte transmission order of the counter. ◆ each channel of the module could be set the counting mode and counting direction independently.
-
CT-222H: 32 channels digital output, source, 24Vdc/0.5A，34Pin male connector
CT-222H: 32 channels digital output, source, 24Vdc/0.5A，34Pin male connector
◆ the module supports 32 channels digital output; the output voltage is 24VDC and the output high level is valid.
◆ module can drive field equipment. (relay, solenoid valve, etc.)
◆ the internal bus of the module and field output are using opto-coupler.
◆ the module carries 32 digital output channel LED indicator light.
◆ the module has the functions of thermal shutdown and overcurrent protection.
◆ the module supports short circuit protection and overload protection.
-
CT-2228: 8 channel digital output/24VDC/ Source type
Module features
◆ the module supports 8-channel digital output, output high level effective, and output voltage 24V
◆ the module could drive field equipment (relay, solenoid valve, etc.)
◆ the module internal bus and field output are isolated by optocoupler
◆ the module carries with 8 digital output channel LED indicator
◆ the module has the functions of thermal shutdown and overcurrent protection
◆ the module supports short circuit protection and overload protection
-
CT-2218 8 channels digital output/24VDC/NPN
◆The module supports 8-channel digital output,
the output voltage is 0VDC and the output low level is valid.
◆The module could drive field equipment (relay, solenoid valve, etc.).
◆The module internal bus and field output are isolated by optocoupler.
◆The module carries with 8 digital output channel LED indicator.
◆The module has the functions of thermal shutdown and short-circuit protection.
